Prepare your skin

1. If you have worn the prosthetics before, clean as best as you can.
2. Remove ALL adhesive possible using the adhesive remover.
3. Clean using Divine Collection Breast Form Wash. 
4. Allow to dry. If you’re in a rush, use a hair dryer to speed up the process.
5. The prosthetic should be naturally tacky.
6. Shower. Clean the skin as well as you can, remove hair, etc. Make sure to use non-moisturizing soaps.
7. Rinse the skin clean and towel dry. Do NOT apply moisturizers, etc. Do NOT use deodorants or antiperspirants to the chest wall; the oils won’t allow adhesives to bond well.
8. Apply Stay Dry to the skin where the prosthetic will be.wall to prevent perspiration. Wait to dry. 

Using Hollister Spray Adhesive 

1. Spray a THIN layer of Hollister Adhesive Spray to the center of the prosthetic. Wait 3 to 6 minutes to dry; it should not be wet, but tacky.
2. Apply Skin Tac Wipe on the skin where the prosthetic will be. Wait 30 seconds to 1 minute until the area becomes tacky.
3. Apply your prosthetic using pressure to the body and allow to bond.
4. If required, use Divine Collection Silicone Medical Adhesive on the edges and press flat.
5. Rest for 10 to 50 minutes and when possible, apply additional pressure to the prosthetic to help bond the product better.
6. You may apply the talc powder to the front of the prosthetic for a softer feeling at this stage if you would like!

Using SilicONE Silicone Spray Adhesive

1. Shake the spray bottle well. Do not dilute.
2. Apply a thin layer of SilicONE Silicone Adhesive Spray to the prosthetic AND the skin where the prosthetic will be.
3. Wait until skin and prosthetic has become tacky rather than wet. Apply prosthetic in to place using pressure to the body and allow to bond.
4. If required, use Divine Collection Silicone Medical Adhesive on the edges and press flat.
5. Rest for 10 to 50 minutes and when possible, apply additional pressure to the breast forms to help bond the product better.
6. You may apply the talc powder to the front of the prosthetic for a softer feeling at this stage if you would like!

Using Deux Silicone Adhesive

1. Shake the bottle well. Do not dilute.
2. Using a cotton pad, wipe the skin and the skin where the prosthetic will be with a thin layer of Deux Silicone Adheisve. Be sure toapply the adhesive all the way to the edges of the prosthetic.
3. Wait until skin and prosthetic has become tacky rather than wet. Apply prosthetic in to place using pressure to the body and allow to bond.
4. If required, use a cotton swab to help apply additional adhesive to the edges and press flat.
5. Rest for 10 to 50 minutes and when possible, apply additional pressure to the breast forms to help bond the product better.
6. You may apply the talc powder to the front of the prosthetic for a softer feeling at this stage if you would like!

Less is more when it comes to using adhesives with Divine Collection prosthetics. When done with your prosthetic, slowly remove from your body by gently pulling at the edges and lifting up. Remove any adhesive with an adhesive remover and wash the breast usingDivine Collection Breast Form Wash. Store on the cradle in the provided storage box to keep them clean and ready for the next wearing!