How to attach Jolie & Nikki thigh & hip pads from Divine Collection

1. If you have worn the thigh pads before, clean your Jolie thigh pads as best as you can. Remove ALL adhesive possible using the adhesive remover, and clean using Divine Collection Breast Form Wash. Allow to dry. The form should be naturally tacky. You may apply the talc powder or corn starch to the front of the pad for a softer feeling.
2. Shower. Clean the skin as well as you can, remove hair, etc. Rinse the skin clean and towel dry. Do NOT apply moisturizers, etc.
3. Apply Divine Collection Stay Dry Sweat Barrier Spray to the thigh to prevent perspiration. Wait to dry. Do NOT use deodorants or antiperspirants; the oils won’t allow adhesives to bond well.
4. Spray a THIN layer of Hollister adhesive to the centre of the pad. Wait 3 to 6 minutes to dry; it should not be wet, but tacky.
5. Apply Skin Tac Wipe to the skin. Wait 30 seconds to 1 minute until the area becomes tacky.
6. Apply the pads using pressure to the body and allow to bond.
7. Rest for 10 to 50 minutes by laying down and when possible, apply additional pressure to the pads to help bond the product better.

Less is more when it comes to using adhesives with Divine Collection body shaping prosthetics. Excessive use of silicone adhesive removers may damage or cause the breakdown of the silicone in the thigh pads. Please use caution when removing any silicone based adhesives from the hip pads.

If you want to wear the thigh pads without adhesive, it is best if you wear the pads with a pair of pantyhose, tights, shapewear, or any sort of garment that will give that extra bit of security. You may find that you have no problem at all wearing the pads everywhere without support as they really hold. Experiment at home to find your best solution.

When done with your hip & thigh pads, slowly remove the pads from your body by gently pulling at the edges and lifting up. Remove any adhesive with an adhesive remover and wash the pads using Divine Collection Breast Form Wash.